【QT】如何自定义QMessageBox的窗口大小，通过继承QDialog重新实现美观的弹窗

news/2024/6/17 13:57:13 标签: qt, 开发语言, QMessageBox, 对话框

目录

  • 1. QMessageBox原有的弹窗
  • 2. 网上第一种方法：通过样式表setStyleSheet实现改变弹窗大小（总体不美观）
  • 3. 网上第二种方法：重写ShowEvent()改变弹窗大小（总体也不美观）
  • 4. 最好的办法：继承QDialog重新实现弹窗界面（附完整代码）(v1.0)
  • 5. v1.0的改进：重新实现弹窗界面（附完整代码）(v2.0)

QMessageBox_1">1. QMessageBox原有的弹窗

  QMessageBox messageBox(QMessageBox::Question, "提示", "是否保存当前项目？", QMessageBox::Yes | QMessageBox::No);
  messageBox.exec();

在这里插入图片描述
可以看出QMessageBox原有的弹窗看起来非常的不美观，有时候大有时候小，只能使用QMessageBox自带的图标，而且不能自定义窗口的大小，那是因为在源码中将其弹窗大小设置成了比较合适的大小，所以不能自定义改变弹窗大小，如下所示代码都是不起作用的：

   messageBox.setGeometry(800, 300, 450, 225);  //（500，300）设置其位置是有效的，但是设置其大小（450, 225）是无效的
   messageBox.resize(450, 225);                 //resize大小也是无效的

2. 网上第一种方法：通过样式表setStyleSheet实现改变弹窗大小（总体不美观）

  QMessageBox messageBox(QMessageBox::Question, "提示", "是否保存当前项目？", QMessageBox::Yes | QMessageBox::No);
  messageBox.setStyleSheet("QLabel{"
                             "min-width:150px;"
                             "min-height:120px;"
                             "font-size:16px;"
                             "}");
  messageBox.exec();

在这里插入图片描述
可以看出通过样式表的方法也不太美观，其中text没有居中。

3. 网上第二种方法：重写ShowEvent()改变弹窗大小（总体也不美观）

先上代码实现一下：
MyMessageBox.h

#include <QLabel>
#include <QMessageBox>
#include <QWidget>

class MyMessageBox : public QMessageBox {
    Q_OBJECT

public:
    MyMessageBox(Icon icon, const QString& title, const QString& text,
                 StandardButtons buttons, QWidget* parent = 0);
    ~MyMessageBox();

protected:
    void showEvent(QShowEvent* event) override;
};

MyMessageBox.cpp

#include "mymessagebox.h"

MyMessageBox::MyMessageBox(Icon icon, const QString& title, const QString& text,
                           StandardButtons buttons, QWidget* parent) :
    QMessageBox(icon, title, text, buttons, parent) {
}

MyMessageBox::~MyMessageBox() {
}

void MyMessageBox::showEvent(QShowEvent* event) {
    QWidget* textLabel = findChild<QWidget*>("qt_msgbox_label");       //获取源码中text的label组件
    QWidget* iconLabel = findChild<QWidget*>("qt_msgbox_icon_label");  //获取源码中icon的label组件

    if (textLabel != nullptr) {  //使用指针之前先判断是否为空
        textLabel->setMinimumSize(450, 255);
        // textLabel->setFixedSize(450, 255);
    }
    if (iconLabel != nullptr) {
        iconLabel->setMinimumHeight(255);
        iconLabel->setFixedSize(450, 255);
    }
    QMessageBox::showEvent(event);
}

main.cpp

#include <QApplication>

#include "mymessagebox.h"

int main(int argc, char* argv[]) {
    QApplication a(argc, argv);

    MyMessageBox messageBox(QMessageBox::Question, "提示", "是否保存当前项目？", QMessageBox::Yes | QMessageBox::No);
    messageBox.exec();

    //w.show();

    return a.exec();
}

解释一下上面的一些代码
先看一下QMessageBox中的一些源码：
在这里插入图片描述
在对某一个组件设置了setObjectName()属性之后，我们可以通过objectName在外面获得这个组件，如下：

//QLabel继承于QWidget，所以用QWidget*是可以的
QWidget* textLabel = findChild<QWidget*>("qt_msgbox_label");  //获取源码中text的label组件

然后对label组件的大小进行调整，达到调整弹窗大小的目的。可以看到弹窗的大小是改变了，但是还是不美观，主要是图标没有居中，还是处在左上角的位置，如下图所示：

在这里插入图片描述
那对于上面这个问题出现的原因是什么呢？那就看一下QMessageBox中的关于布局Layout的一些源码：
在这里插入图片描述
可以看出在布局时，其icon总是处在第0行第0列的位置，且其Aliment设置的是Top，所以导致了QMessageBox的图标总是在左上角。
所以重写ShowEvent()这种方法也达不到实现美观的弹窗的预期。

4. 最好的办法：继承QDialog重新实现弹窗界面（附完整代码）(v1.0)

重新写一个弹窗TipDialog类，继承于QDialog类。
先看效果：
在这里插入图片描述
直接上代码：
TipDialog.h

#ifndef TIPDIALOG_H
#define TIPDIALOG_H

#include <QDialog>
#include <QDialogButtonBox>
#include <QHBoxLayout>
#include <QIcon>
#include <QLabel>
#include <QMessageBox>
#include <QMetaEnum>
#include <QPixmap>
#include <QPushButton>
#include <QVBoxLayout>

class TipDialog : public QDialog {
    Q_OBJECT

public:
    enum TipIcon {
        NoIcon = 0,
        Information = 1,
        Question = 2,
        Success = 3,
        Warning = 4,
        Critical = 5
    };
    Q_ENUM(TipIcon)  //使用Q_ENUM注册枚举

    enum StandardButton {
        //保持与 QDialogButtonBox::StandardButton 一致，后面在创建按钮时会用到 & 运算
        NoButton = 0x00000000,
        Ok = 0x00000400,
        Save = 0x00000800,
        SaveAll = 0x00001000,
        Open = 0x00002000,
        Yes = 0x00004000,
        YesToAll = 0x00008000,
        No = 0x00010000,
        NoToAll = 0x00020000,
        Abort = 0x00040000,
        Retry = 0x00080000,
        Ignore = 0x00100000,
        Close = 0x00200000,
        Cancel = 0x00400000,
        Discard = 0x00800000,
        Help = 0x01000000,
        Apply = 0x02000000,
        Reset = 0x04000000,
        RestoreDefaults = 0x08000000,

        FirstButton = Ok,
        LastButton = RestoreDefaults
    };
    Q_ENUM(StandardButton)
    Q_DECLARE_FLAGS(StandardButtons, StandardButton)
    Q_FLAG(StandardButtons)

    enum ButtonRole {
        //保持与 QDialogButtonBox::ButtonRole 一致
        InvalidRole = -1,
        AcceptRole,
        RejectRole,
        DestructiveRole,
        ActionRole,
        HelpRole,
        YesRole,
        NoRole,
        ResetRole,
        ApplyRole,

        NRoles
    };

    explicit TipDialog(QWidget* parent = nullptr);
    TipDialog(TipIcon icon, const QString& title, const QString& text, StandardButtons buttons,
              QWidget* parent = nullptr);  //构造函数有默认值的要放后面
    ~TipDialog();

    static void information(QWidget* parent, const QString& title, const QString& text, StandardButtons buttons = Ok);
    static void question(QWidget* parent, const QString& title, const QString& text, StandardButtons buttons = StandardButtons(Yes | No));
    static void success(QWidget* parent, const QString& title, const QString& text, StandardButtons buttons = Ok);
    static void warning(QWidget* parent, const QString& title, const QString& text, StandardButtons buttons = Ok);
    static void critical(QWidget* parent, const QString& title, const QString& text, StandardButtons buttons = Ok);

private:
    void init(const QString& title = QString(), const QString& text = QString());
    void setupLayout();
    QPixmap standardIcon(TipDialog::TipIcon icon);
    void setIcon(TipIcon icon);
    void createButton(StandardButton button);
    void createStandardButtons(StandardButtons buttons);
    void setStandardButtons(StandardButtons buttons);
    //    QString standardTitle(TipDialog::TipIcon icon);
    QString getEnumKey(StandardButton button);
    void addButton(StandardButton button, QDialogButtonBox::ButtonRole buttonRole);

private:
    QLabel* m_pIconLabel;
    QLabel* m_pTextLabel;
    QDialogButtonBox* m_pButtonBox;
    //    QList<QPushButton*> m_pButtonList;
    QString m_text;
};

//在全局任意地方使用"|"操作符计算自定义的枚举量，需要使用Q_DECLARE_OPERATORS_FOR_FLAGS宏
Q_DECLARE_OPERATORS_FOR_FLAGS(TipDialog::StandardButtons)

#endif  // TIPDIALOG_H

TipDialog.cpp

#include "tipdialog.h"

#define fontFamily "宋体"
#define fontSize 12

TipDialog::TipDialog(QWidget* parent) :
    QDialog(parent) {
    init();
}

TipDialog::TipDialog(TipIcon icon, const QString& title, const QString& text, StandardButtons buttons, QWidget* parent) :
    QDialog(parent) {
    init(title, text);
    setWindowTitle(title);
    setIcon(icon);
    setStandardButtons(buttons);
    //    setupLayout();
}

TipDialog::~TipDialog() {}

void TipDialog::information(QWidget* parent, const QString& title, const QString& text, StandardButtons buttons) {
    TipDialog tip(Information, title, text, buttons, parent);
    tip.exec();
}

void TipDialog::question(QWidget* parent, const QString& title, const QString& text, StandardButtons buttons) {
    TipDialog tip(Question, title, text, buttons, parent);
    tip.exec();
}

void TipDialog::success(QWidget* parent, const QString& title, const QString& text, StandardButtons buttons) {
    TipDialog tip(Success, title, text, buttons, parent);
    tip.exec();
}

void TipDialog::warning(QWidget* parent, const QString& title, const QString& text, StandardButtons buttons) {
    TipDialog tip(Warning, title, text, buttons, parent);
    tip.exec();
}

void TipDialog::critical(QWidget* parent, const QString& title, const QString& text, StandardButtons buttons) {
    TipDialog tip(Critical, title, text, buttons, parent);
    tip.exec();
}

void TipDialog::init(const QString& title, const QString& text) {
    resize(QSize(450, 225));
    setWindowIcon(QIcon(":/new/prefix1/Icon/项目.png"));
    setWindowTitle("operation tip...");
    setWindowFlags(Qt::CustomizeWindowHint | Qt::WindowCloseButtonHint);  //设置右上角按钮
    //setAttribute(Qt::WA_DeleteOnClose);                                   //关闭窗口时将窗口释放掉即释放内存

    m_pIconLabel = new QLabel(this);
    m_pIconLabel->setObjectName(QLatin1String("iconLabel"));
    m_pTextLabel = new QLabel(this);
    m_pTextLabel->setObjectName(QLatin1String("textLabel"));
    m_pTextLabel->setTextInteractionFlags(Qt::TextBrowserInteraction);  //label中的内容可用鼠标选择文本复制，链接激活
    m_pTextLabel->setOpenExternalLinks(true);                           //label中的内容若为链接，可直接点击打开
    m_pButtonBox = new QDialogButtonBox(this);
    m_pButtonBox->setObjectName(QLatin1String("buttonBox"));

    if (!title.isEmpty() || !text.isEmpty()) {
        setWindowTitle(title);
        m_pTextLabel->setFont(QFont(fontFamily, fontSize));
        m_pTextLabel->setText(text);
    }

    m_text = text;

    setupLayout();
}

void TipDialog::setupLayout() {
    QHBoxLayout* HLay = new QHBoxLayout;
    HLay->addWidget(m_pIconLabel, 1, Qt::AlignVCenter | Qt::AlignRight);
    HLay->addWidget(m_pTextLabel, 5, Qt::AlignCenter);
    QVBoxLayout* VLay = new QVBoxLayout;
    VLay->addLayout(HLay);
    VLay->addWidget(m_pButtonBox);
    setLayout(VLay);
}

QPixmap TipDialog::standardIcon(TipDialog::TipIcon icon) {
    QPixmap pixmap;
    switch (icon) {
        case TipDialog::Information:
            pixmap.load(":/new/prefix1/Image/Information.png");
            break;
        case TipDialog::Question:
            pixmap.load(":/new/prefix1/Image/Question.png");
            break;
        case TipDialog::Success:
            pixmap.load(":/new/prefix1/Image/Success.png");
            break;
        case TipDialog::Warning:
            pixmap.load(":/new/prefix1/Image/Warning.png");
            break;
        case TipDialog::Critical:
            pixmap.load(":/new/prefix1/Image/Critical.png");
            break;
        default:
            break;
    }
    if (!pixmap.isNull())
        return pixmap;
    return QPixmap();
}

void TipDialog::setIcon(TipDialog::TipIcon icon) {
    m_pIconLabel->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
    m_pIconLabel->setPixmap(standardIcon(icon));
}

void TipDialog::createButton(StandardButton button) {
    switch (button) {
        case TipDialog::Ok:
            addButton(button, QDialogButtonBox::AcceptRole);
            break;
        case TipDialog::Save:
            addButton(button, QDialogButtonBox::AcceptRole);
            break;
        case TipDialog::Yes:
            addButton(button, QDialogButtonBox::YesRole);
            break;
        case TipDialog::No:
            addButton(button, QDialogButtonBox::NoRole);
            break;
        case TipDialog::Cancel:
            addButton(button, QDialogButtonBox::RejectRole);
            break;
        default:
            break;
    }
}
void TipDialog::createStandardButtons(StandardButtons buttons) {
    //TipDialog::StandardButtons 与 QDialogButtonBox::StandardButtons 的枚举是一样的
    uint i = QDialogButtonBox::FirstButton;  //枚举值为非负整数，使用uint
    while (i <= QDialogButtonBox::LastButton) {
        if (i & buttons) {
            createButton(StandardButton(i));
        }
        i = i << 1;
    }
}

void TipDialog::setStandardButtons(StandardButtons buttons) {
    if (buttons != NoButton)
        createStandardButtons(buttons);
}

//QString TipDialog::standardTitle(TipDialog::TipIcon icon) {
//    QString title;
//    switch (icon) {
//        case TipDialog::Information:
//            title = "Information";
//            break;
//        case TipDialog::Question:
//            title = "Question";
//            break;
//        case TipDialog::Success:
//            title = "Success";
//            break;
//        case TipDialog::Warning:
//            title = "Warning";
//            break;
//        case TipDialog::Critical:
//            title = "Critical";
//            break;
//        default:
//            break;
//    }
//    if (!title.isEmpty())
//        return title;
//    return QString();
//}

QString TipDialog::getEnumKey(StandardButton button) {
    QMetaEnum metaEnum = QMetaEnum::fromType<StandardButton>();  //获取QMetaEnum对象，为了获取枚举值
    QString str = metaEnum.valueToKey(button);
    if (!str.isEmpty())
        return str;
    return QString();
}

void TipDialog::addButton(TipDialog::StandardButton button, QDialogButtonBox::ButtonRole buttonRole) {
    QString buttonText = getEnumKey(button);
    QPushButton* pushButton = m_pButtonBox->addButton(buttonText, buttonRole);
    //    if (pushButton->text() == QLatin1String("Yes") && m_text.contains("save", Qt::CaseSensitive)) {
    //        pushButton->setText("Save");
    //    } else if (pushButton->text() == QLatin1String("Yes") && m_text.contains("delete", Qt::CaseSensitive)) {
    //        pushButton->setText("Delete");
    //    }
    //    m_pButtonList.append(pushButton);
    connect(pushButton, &QPushButton::clicked, this, &TipDialog::close);
}

main.cpp

#include <QApplication>
#include <QMessageBox>

#include "tipdialog.h"

int main(int argc, char* argv[]) {
    QApplication a(argc, argv);

    //TipDialog aa(TipDialog::Question, "Question", "The current project has been modified.\nDo you want to save it?", TipDialog::Yes | TipDialog::No);
    //TipDialog aa(TipDialog::Success, "Success", "Project saved successfully!", TipDialog::Ok);
    //TipDialog aa(TipDialog::Warning, "Warning", "Parsed file not found! Please reconfigure!", TipDialog::Ok);
    TipDialog aa(TipDialog::Critical, "Critical", "Loading failed.Please tryagain!", TipDialog::Ok);

    aa.show();

    return a.exec();
}

注意：需要在Resources文件中自己手动添加icon图片。

5. v1.0的改进：重新实现弹窗界面（附完整代码）(v2.0)

增加了许多接口，并且之前v1.0版本添加按钮是自己实现的，其实不需要，直接使用QDialogButtonBox的接口会更方便。
MyMessageBox.h

#ifndef MyMessageBox_H
#define MyMessageBox_H

#include <QDebug>
#include <QDialog>
#include <QDialogButtonBox>
#include <QHBoxLayout>
#include <QIcon>
#include <QLabel>
#include <QMetaEnum>
#include <QPixmap>
#include <QPushButton>
#include <QVBoxLayout>

class MyMessageBox : public QDialog {
    Q_OBJECT

public:
    enum Icon {
        NoIcon = 0,
        Information = 1,
        Question = 2,
        Success = 3,
        Warning = 4,
        Critical = 5
    };
    Q_ENUM(Icon)  //使用Q_ENUM注册枚举

    enum StandardButton {
        //保持与 QDialogButtonBox::StandardButton 一致，后面在创建按钮时会用到 & 运算
        NoButton = 0x00000000,
        Ok = 0x00000400,
        Save = 0x00000800,
        SaveAll = 0x00001000,
        Open = 0x00002000,
        Yes = 0x00004000,
        YesToAll = 0x00008000,
        No = 0x00010000,
        NoToAll = 0x00020000,
        Abort = 0x00040000,
        Retry = 0x00080000,
        Ignore = 0x00100000,
        Close = 0x00200000,
        Cancel = 0x00400000,
        Discard = 0x00800000,
        Help = 0x01000000,
        Apply = 0x02000000,
        Reset = 0x04000000,
        RestoreDefaults = 0x08000000,

        FirstButton = Ok,
        LastButton = RestoreDefaults
    };
    Q_ENUM(StandardButton)
    Q_DECLARE_FLAGS(StandardButtons, StandardButton)
    Q_FLAG(StandardButtons)

    enum ButtonRole {
        //保持与 QDialogButtonBox::ButtonRole 一致
        InvalidRole = -1,
        AcceptRole,
        RejectRole,
        DestructiveRole,
        ActionRole,
        HelpRole,
        YesRole,
        NoRole,
        ResetRole,
        ApplyRole,

        NRoles
    };

    explicit MyMessageBox(QWidget* parent = nullptr);
    MyMessageBox(Icon icon, const QString& title, const QString& text, StandardButtons buttons,
                 QWidget* parent = nullptr);  //构造函数有默认值的要放后面
    ~MyMessageBox();

    void setTitle(const QString& title);

    Icon icon() const;
    void setIcon(Icon icon);

    QPixmap iconPixmap() const;
    void setIconPixmap(const QPixmap& pixmap);

    QString text() const;
    void setText(const QString& text);

    StandardButtons standardButtons() const;
    void setStandardButtons(StandardButtons buttons);
    StandardButton standardButton(QAbstractButton* button) const;
    QAbstractButton* button(StandardButton which) const;

    ButtonRole buttonRole(QAbstractButton* button) const;

    QAbstractButton* clickedButton() const;

    static StandardButton information(QWidget* parent, const QString& text, QString title = "Message", StandardButtons buttons = Ok);
    static StandardButton question(QWidget* parent, const QString& text, QString title = "Message", StandardButtons buttons = StandardButtons(Yes | No));
    static StandardButton success(QWidget* parent, const QString& text, QString title = "Message", StandardButtons buttons = Ok);
    static StandardButton warning(QWidget* parent, const QString& text, QString title = "Message", StandardButtons buttons = Ok);
    static StandardButton critical(QWidget* parent, const QString& text, QString title = "Message", StandardButtons buttons = Ok);

private slots:
    void slotPushButtonClicked(QAbstractButton* button);

private:
    void init();
    void setupLayout();
    QPixmap standardIcon(Icon icon);
    void setClickedButton(QAbstractButton* button);
    void finalize(QAbstractButton* button);
    int dialogCodeForButton(QAbstractButton* button) const;

private:
    QLabel* m_pIconLabel;
    MyMessageBox::Icon m_icon;
    QLabel* m_pTextLabel;
    QLabel* m_pLineLabel;
    QDialogButtonBox* m_pButtonBox;
    QAbstractButton* m_pClickedButton;
};

//在全局任意地方使用"|"操作符计算自定义的枚举量，需要使用Q_DECLARE_OPERATORS_FOR_FLAGS宏
Q_DECLARE_OPERATORS_FOR_FLAGS(MyMessageBox::StandardButtons)

#endif  // MyMessageBox_H

MyMessageBox.cpp

#include "MyMessageBox.h"

#define fontFamily "微软雅黑"
#define fontSize 12

MyMessageBox::MyMessageBox(QWidget* parent) :
    QDialog(parent) {
    init();
}

MyMessageBox::MyMessageBox(Icon icon, const QString& title, const QString& text, StandardButtons buttons, QWidget* parent) :
    QDialog(parent) {
    init();
    setTitle(title);
    setIcon(icon);
    setText(text);
    if (buttons != NoButton)
        setStandardButtons(buttons);
    //    setupLayout();
}

MyMessageBox::~MyMessageBox() {}

void MyMessageBox::setTitle(const QString& title) {
    setWindowTitle(title);
}

MyMessageBox::Icon MyMessageBox::icon() const {
    return m_icon;
}

void MyMessageBox::setIcon(MyMessageBox::Icon icon) {
    setIconPixmap(standardIcon(icon));
    m_icon = icon;
}

QPixmap MyMessageBox::iconPixmap() const {
    return *m_pIconLabel->pixmap();
}

void MyMessageBox::setIconPixmap(const QPixmap& pixmap) {
    //    m_pIconLabel->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
    m_pIconLabel->setPixmap(pixmap);
    m_icon = NoIcon;
}

QString MyMessageBox::text() const {
    return m_pTextLabel->text();
}

void MyMessageBox::setText(const QString& text) {
    m_pTextLabel->setFont(QFont(fontFamily, fontSize));
    m_pTextLabel->setText(text);
}

MyMessageBox::StandardButtons MyMessageBox::standardButtons() const {
    QDialogButtonBox::StandardButtons standardButtons = m_pButtonBox->standardButtons();
    return MyMessageBox::StandardButtons(int(standardButtons));  //不同类型的枚举转换
}

void MyMessageBox::setStandardButtons(StandardButtons buttons) {
    QDialogButtonBox::StandardButtons standardButtons = QDialogButtonBox::StandardButtons(int(buttons));
    m_pButtonBox->setStandardButtons(standardButtons);
    //    m_pButtonBox->setStandardButtons(QDialogButtonBox::StandardButtons(int(buttons)));  //上面两句归为一句
}

MyMessageBox::StandardButton MyMessageBox::standardButton(QAbstractButton* button) const {
    QDialogButtonBox::StandardButton standardButton = m_pButtonBox->standardButton(button);
    return (MyMessageBox::StandardButton)standardButton;  //转化为当前类的StandardButton类型
}

QAbstractButton* MyMessageBox::button(MyMessageBox::StandardButton which) const {
    QDialogButtonBox::StandardButton standardButton = QDialogButtonBox::StandardButton(which);
    return m_pButtonBox->button(standardButton);
}

MyMessageBox::ButtonRole MyMessageBox::buttonRole(QAbstractButton* button) const {
    QDialogButtonBox::ButtonRole buttonRole = m_pButtonBox->buttonRole(button);
    return MyMessageBox::ButtonRole(buttonRole);
}

QAbstractButton* MyMessageBox::clickedButton() const {
    return m_pClickedButton;
}

MyMessageBox::StandardButton MyMessageBox::information(QWidget* parent, const QString& text, QString title, StandardButtons buttons) {
    MyMessageBox msgBox(Information, title, text, buttons, parent);
    if (msgBox.exec() == -1)
        return MyMessageBox::Cancel;
    return msgBox.standardButton(msgBox.clickedButton());
}

MyMessageBox::StandardButton MyMessageBox::question(QWidget* parent, const QString& text, QString title, StandardButtons buttons) {
    MyMessageBox msgBox(Question, title, text, buttons, parent);
    if (msgBox.exec() == -1)
        return MyMessageBox::Cancel;
    return msgBox.standardButton(msgBox.clickedButton());
}

MyMessageBox::StandardButton MyMessageBox::success(QWidget* parent, const QString& text, QString title, StandardButtons buttons) {
    MyMessageBox msgBox(Success, title, text, buttons, parent);
    if (msgBox.exec() == -1)
        return MyMessageBox::Cancel;
    return msgBox.standardButton(msgBox.clickedButton());
}

MyMessageBox::StandardButton MyMessageBox::warning(QWidget* parent, const QString& text, QString title, StandardButtons buttons) {
    MyMessageBox msgBox(Warning, title, text, buttons, parent);
    if (msgBox.exec() == -1)
        return MyMessageBox::Cancel;
    return msgBox.standardButton(msgBox.clickedButton());
}

MyMessageBox::StandardButton MyMessageBox::critical(QWidget* parent, const QString& text, QString title, StandardButtons buttons) {
    MyMessageBox msgBox(Critical, title, text, buttons, parent);
    if (msgBox.exec() == -1)
        return MyMessageBox::Cancel;
    return msgBox.standardButton(msgBox.clickedButton());
}

void MyMessageBox::slotPushButtonClicked(QAbstractButton* button) {
    setClickedButton(button);
    finalize(button);
    close();
}

void MyMessageBox::init() {
    resize(QSize(450, 225));
    setWindowIcon(QIcon(":/new/prefix1/Icon/project.ico"));
    setWindowTitle("Message");
    setWindowFlags(Qt::CustomizeWindowHint | Qt::WindowCloseButtonHint);  //设置右上角按钮
    //setAttribute(Qt::WA_DeleteOnClose);                                   //关闭窗口时将窗口释放掉即释放内存

    m_pIconLabel = new QLabel(this);
    m_pIconLabel->setObjectName(QLatin1String("iconLabel"));
    m_pTextLabel = new QLabel(this);
    m_pTextLabel->setObjectName(QLatin1String("textLabel"));
    m_pTextLabel->setTextInteractionFlags(Qt::TextBrowserInteraction);  //label中的内容可用鼠标选择文本复制，链接激活
    m_pTextLabel->setOpenExternalLinks(true);                           //label中的内容若为链接，可直接点击打开
    m_pLineLabel = new QLabel(this);
    m_pLineLabel->setFrameStyle(QFrame::HLine | QFrame::Sunken);  //Sunken:凹陷，Raised：凸起
    m_pButtonBox = new QDialogButtonBox(this);
    m_pButtonBox->setObjectName(QLatin1String("buttonBox"));
    connect(m_pButtonBox, &QDialogButtonBox::clicked, this, &MyMessageBox::slotPushButtonClicked);

    setupLayout();
}

void MyMessageBox::setupLayout() {
    QHBoxLayout* HLay = new QHBoxLayout;
    HLay->addWidget(m_pIconLabel, 1, Qt::AlignVCenter | Qt::AlignRight);
    HLay->addWidget(m_pTextLabel, 5, Qt::AlignCenter);
    QHBoxLayout* HLay1 = new QHBoxLayout;
    HLay1->addWidget(m_pButtonBox, Qt::AlignRight);
    //    QMargins margin;
    //    margin.setRight(9);
    //    HLay1->setContentsMargins(margin);  //调节按钮不要太靠右
    QVBoxLayout* VLay = new QVBoxLayout;
    VLay->addLayout(HLay, 10);
    VLay->addWidget(m_pLineLabel, 1);
    VLay->addLayout(HLay1, 4);
    VLay->setSpacing(0);
    setLayout(VLay);
}

QPixmap MyMessageBox::standardIcon(Icon icon) {
    QPixmap pixmap;
    switch (icon) {
        case MyMessageBox::Information:
            pixmap.load(":/new/prefix1/Image/Information.png");
            break;
        case MyMessageBox::Question:
            pixmap.load(":/new/prefix1/Image/Question.png");
            break;
        case MyMessageBox::Success:
            pixmap.load(":/new/prefix1/Image/Success.png");
            break;
        case MyMessageBox::Warning:
            pixmap.load(":/new/prefix1/Image/Warning.png");
            break;
        case MyMessageBox::Critical:
            pixmap.load(":/new/prefix1/Image/Critical.png");
            break;
        default:
            break;
    }
    if (!pixmap.isNull())
        return pixmap;
    return QPixmap();
}

void MyMessageBox::setClickedButton(QAbstractButton* button) {
    m_pClickedButton = button;
}

void MyMessageBox::finalize(QAbstractButton* button) {
    int dialogCode = dialogCodeForButton(button);
    if (dialogCode == QDialog::Accepted) {
        emit accepted();
    } else if (dialogCode == QDialog::Rejected) {
        emit rejected();
    }
}

int MyMessageBox::dialogCodeForButton(QAbstractButton* button) const {
    switch (buttonRole(button)) {
        case MyMessageBox::AcceptRole:
        case MyMessageBox::YesRole:
            return QDialog::Accepted;
        case MyMessageBox::RejectRole:
        case MyMessageBox::NoRole:
            return QDialog::Rejected;
        default:
            return -1;
    }
}

注意：需要在Resources文件中自己手动添加icon图片。


http://www.niftyadmin.cn/n/1005527.html

相关文章

关于Nuxt3.6兼容低版本游览器的实战以及可能存在的问题

关于Nuxt3.6兼容低版本游览器的实战以及可能存在的问题

当我们网站打包上线后&#xff0c;有些问题我们肯定也要考虑在内&#xff0c;兼容性也是其中一个重要的一种&#xff0c;可能会有人说&#xff0c;都2023年了&#xff0c;还在乎那些废弃的游览器干啥&#xff0c;我只能说&#xff0c;错&#xff01;大错特错&#xff01; 我们不…
阅读更多...
sonarqube安装以及jenkins集成sonarqube

sonarqube安装以及jenkins集成sonarqube

一、sonarqube安装 docker方式安装sonarqube docker 方式安装是最简便的&#xff0c;我选择了这个安装方式 1、下载镜像 docker pull postgres:latest docker pull sonarqube2、 创建挂载目录 #用于postgres的挂载目录 mkdir -p /opt/postgres/postgresql mkdir -p /opt/po…
阅读更多...
Scrapy框架之MongoDB通过配置文件管理参数--Linux安装MongoDB--图形管理工具

Scrapy框架之MongoDB通过配置文件管理参数--Linux安装MongoDB--图形管理工具

目录 MongoDB通过配置文件 问题 解决方案 步骤 提示 Linux安装MongoDB 环境 下载依赖与安装包 解压安装 MongoDB GUI管理工具 独立软件GUI软件 Robo 3T使用 VSCode集成GUI插件 MongoDB通过配置文件 问题 启动MongoDB时&#xff0c;编写参数太麻烦 解决方案 通过配…
阅读更多...
转载-【AI思维空间】Chat2DB 一款开源数据库客户单工具

转载-【AI思维空间】Chat2DB 一款开源数据库客户单工具

卸载 Navicat&#xff0c; xxx 又开源了一款数据库神器&#xff0c;太炸了 Chat2DB 是一款有开源免费的多数据库客户端工具&#xff0c;支持windows、mac本地安装&#xff0c;也支持服务器端部署&#xff0c;web网页访问。和传统的数据库客户端软件Navicat、DBeaver 相比Chat2D…
阅读更多...
Leetcode 剑指 Offer II 033. 变位词组

Leetcode 剑指 Offer II 033. 变位词组

题目难度: 中等 原题链接 今天继续更新 Leetcode 的剑指 Offer&#xff08;专项突击版&#xff09;系列, 大家在公众号 算法精选 里回复 剑指offer2 就能看到该系列当前连载的所有文章了, 记得关注哦~ 题目描述 给定一个字符串数组 strs &#xff0c;将 变位词 组合在一起。 可…
阅读更多...
windows 和华为手机使用charles抓包记录

windows 和华为手机使用charles抓包记录

1.下载charles 建议安装使用最新版&#xff0c;官方下载地址 https://www.charlesproxy.com/download help->Register->把上面的生成注册码放进去就行了&#xff08;在charles注册地址里面注册一下&#xff0c;charles注册地址&#xff09; 2.Proxy-> 勾选window…
阅读更多...
ChatGPT 有什么新奇的使用方式？

ChatGPT 有什么新奇的使用方式？

先来看看ChatGPT对此问题如何作答 ChatGPT对此问题如何作答 ChatGPT是什么 ChatGPT是一种基于自然语言处理的语言模型&#xff0c;由OpenAI开发。它是建立在GPT&#xff08;Generative Pre-trained Transformer&#xff09;架构的基础上的&#xff0c;采用了深度学习技术。GP…
阅读更多...
如何修改Jupyter Notebook的默认目录和默认浏览器

如何修改Jupyter Notebook的默认目录和默认浏览器

一、修改默认目录 Jupyter Notebook的文件默认保存目录是C:\Users\Administrator&#xff0c;默认目录可在黑窗口中查看&#xff0c;如下图所示&#xff1a; 为了方便文档的管理&#xff0c;可将默认目录修改成自己想保存的地方。修改方法如下&#xff1a; 1、找到config文件 …
阅读更多...
最新文章

Copyright @ 2022~2023